Filter By:
- Bar Ends (3)
- BMX (2)
- Bottom Brackets (46)
- Brakes/Levers/Pads (151)
- Cables (28)
- Cassettes/Freewheels (39)
- Chainrings (38)
- Chains (56)
- Show More Categories
- Cranksets (61)
- Derailleurs (96)
- Forks (11)
- Groups (1)
- Handlebar Grips/Tape (64)
- Handlebars (45)
- Headsets (27)
- Pedals (82)
- Saddles/Pads (64)
- Seatposts (29)
- Shift/Brake Combinations (31)
- Shifters (45)
- Stems (29)
- Other (152)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Prices
- Show Fewer Prices
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts
(1083 matches)
$109.99 - $119.99
3T's ARX II Team stem is the perfect finishing touch. It's made of aluminum for light weight, durability, and excellent stiffness. Refined shaping of the clamping areas results in outstanding stress distribution on the bars and steerer for safety. Plus, it features 3T's secure aluminum 4-bolt faceplate.
- Aluminum stem with 40mm stack height
- Single M6 bolt clamps stem to fork steerer
- T25 bolts on bar clamp
- 120 grams for 110mm
- Bar Clamp Diameter: 31.8 mm
- S.H.I.S. Stem Clamp Diameter: 28.6mm
- Weight: 120 grams (110mm)
$349.99 - $369.99
3T's Ergonova Team Handlebar features a wider, flatter top section that provides more surface area for your hands. A tight radius where the brake lever sits and a gradual bend make it easy to reach your levers while in the drops. Carbon fiber construction makes it lightweight, strong, and stiff for sprinting and climbing. Cable grooves on the underside provide a smooth feel when you're on the tops.
$6.42
- Aheadset preload adjusting bolt, cap and star nut
- Bolt is hollow for cable pass-through
$7.00
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
$8.00
Bolt on Avid's 20R Brake Pads for consistent, powerful braking. They're designed for use with linear-pull brakes.
$9.00
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.
$14.00
Avid makes it easy to get a perfectly set up brake with their innovative CPS Hardware Kit. Each kit features a series of washers that make it easy to set up your brake. Step 1: Install the bolts and washers loosely so the caliper can move. Step 2: Squeeze the brake lever. Step 3: Tighten the bolts. It's that simple to get a rub-free setup! This kit includes stainless steel hardware with washers and bolts for both CPS (Caliper Positioning System) mounting and standard (direct-mount)mounting.
$14.99
Light and smooth, Avid's FR-5 Brake Levers deliver excellent speed control and a great feel. They're compatible with linear-pull and mechanical-disc brakes. And, they also feature adjustable reach and are made to bend not break in the event of a crash. This ambidextrous lever can be used as a front or rear, too.
$16.99 - $29.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$17.00
Bolt on Avid's Rim Wrangler 2 Brake Pads for excellent stopping power. The cartridge design makes it easy to switch pads when they wear out. They're designed for use with linear-pull brakes.
$17.00
Slip Avid's Shorty Brake Pad Inserts into your Shorty cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
$17.00
Stiff, light and beautiful, Avid's Speed Dial 7 Brake Levers deliver excellent speed control and a great feel for your linear-pull or mechanical-disc brakes. And, they also feature adjustable reach for maximum hand comfort and are made to bend, not break, in the event of a crash. Plus, by turning Avid's Speed Dial knob, you can precisely tune the feel of your brakes any time without tools. This ambidextrous lever can be used as a front or rear lever, too.
$19.99
Stiff, light and beautiful, Avid's FR-5 Brake Levers deliver excellent speed control and a great feel. They're compatible with linear-pull and mechanical-disc brakes. And, they also feature adjustable reach and are made to bend not break in the event of a crash.
$21.00
- Includes stainless bolts
- Fits 160mm front and 140mm rear rotors
$24.00
- Includes stainless steel bolts
- 40mm fits 200mm Front and 180mm Rear Rotors
$24.99 - $32.00
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$24.99 - $27.99
To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.
$25.99
Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.
$29.99 - $53.00
Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.
$30.00
Stiff, light and beautiful, Avid's Speed Dial 7 Brake Levers deliver excellent speed control and a great feel for your linear-pull or mechanical-disc brakes. And, they also feature adjustable reach for maximum hand comfort and are made to bend, not break, in the event of a crash. Plus, by turning Avid's Speed Dial knob, you can precisely tune the feel of your brakes any time without tools.
$32.00 - $49.99
Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.
$35.00
Cost effective stopping power from the leader in cable-actuated disc brakes.
- All calipers have 74mm mounting bolt spacing
- For use with with long cable-pull levers
- Mono-block caliper design has outboard pad adjustment
- Spring tension is adjustable
- Includes steel-backed organic pads
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Long Pull
- Rotor Included: No
- Weight: 215 g
$35.00
Cost effective stopping power from the leader in cable-actuated disc brakes.
- For use with short cable-pull levers
- Mono-block caliper design has outboard pad adjustment
- Spring tension is adjustable
- Caliper has 74mm mounting bolt spacing; mounting adaptors are sold separately
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Short Pull
- Rotor Included: No
- Weight: 215 g
$39.99 - $45.00
Smooth, controlled braking is yours with Avid's G2 CleanSweep Rotor. It utilizes cross-drilled technology to dissipate heat and cut weight, giving you a consistent feel at the lever and predictable speed control in all conditions.
$40.00 - $42.00
Making brakes that slow you down is easy, but making them light, powerful, efficient and adjustable is Avid's specialty. That's exactly what you get with their Single Digit 7 Rim Brake. Its low weight won't hold you back on climbs, while its impressive durability will provide super-smooth action season after season. Plus the Single Digit 7 even comes with cartridge pads for authoritative stops and easy maintenance.
$52.00
Avid takes entry level to a whole new level with the BB5s, which feature ball bearings (where the BB comes from in the name), a melt-forged body and a CleanSweep rotor for excellent stopping power and awesome durability. Plus, an inboard pad adjustment knob lets you dial in the perfect distance between the rotor and the pads, while Avid's ingenious Tri-Align caliper-positioning system perfectly aligns the pads parallel to the rotor in seconds. And, the tool-free pad replacement and adjustment makes quick work out of accommodating for pad wear, so you always have positive, powerful braking.
$53.00
Good brakes that slow you down predictably in all conditions are invaluable. Bolt on a set of Avid's powerful, lightweight and incredibly adjustable Shorty 6 cantilever brakes and you'll see what we mean. When hard braking is the norm, like during a cyclocross race, the Shorty's double-arm design ensures heaps of power, modulation and a snappy feel. Plus, the Shorty uses convenient cartridge pad holders that make changing your pads a snap. Like an old friend that never lets you down, these brakes are durable and provide super smooth action season after season.
$59.99
Clean up your handlebar with Avid's MatchMaker X clamp. It combines mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can shed grams and keep your bars nice and tidy. You can also integrate RockShox's XLoc remote for maximum convenience and ease of use.
$61.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance.
- All calipers have 74mm mounting bolt spacing
- For use with long cable-pull levers
- Pad retraction and spring tension are adjustable
- Includes steel-backed sintered pads
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Long Pull
- Hub/Disc Compatibility: 6-Bolt
- Rotor Included: No
$61.00
The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance.
- All calipers have 74mm mounting bolt spacing
- For use with short cable-pull levers
- Pad retraction and spring tension are adjustable
- Includes steel-backed sintered pads
- Brake Caliper Type: Post Mount
- Brake Lever Actuation: Short Pull
- Hub/Disc Compatibility: 6-Bolt
- Rotor Included: No
- Weight: 204 g
Page 1 of 37
Next page